The Think Tank

Arrow Shaft
A/C/C 3-39 @ 29.75″ – 100gr

Draw Length
30.5″

Draw Weight
56 lbs.

Axel-to-Axel
42″  –  Top of top pin to center of bottom pin

Peep Sight
14.625mm  –  Front of T-square resting on the center of the nock

Tiller
Top/Bottom: 23mm
Outside of string, measured from front of T-square

Rest
Horizontal: 29mm  –  Measured from end of T-square
Vertical: 28.9mm  –  Measured from end of T-square
From String: 18.5mm  –  Front of T-square to tips of Launcher

Nock Point
Top:  -3.25mm  –  Inside edge with T-square @ lowest point in V of rest
Bottom: -7.5mm  –  Inside edge with T-square @ lowest point in V of rest
D-Loop: 1/2 inch – from outside of string to inside of D-Loop

Cable Guard
Position: Flush to front of riser
Control Yoke: Outside slot on slider
Bus Cable: Inside slot on slider

Wheels:
Top At Rest

Bottom At Rest

Top At Full Draw

Bottom At Full Draw

Stabilizer
Kudalec 4-Rod

Stabilizer Weights:
All weights measured to center of set-screw

First: Small steel – 3 ^11/16 inches from front of stabilizer
Second: Large Aluminum – 13 ^3/16 inches from front of stabilizer
Third: Large Aluminum – 23 ^9/16 inches from front of stabilizer