Archery
Shortened D loop – 2013 Dominator
by Chris on Jun.10, 2013, under Bow Changes
A couple weeks ago I tightened down the d loop but that made it about 1/8 inch too long. I loosened it up today, pulled the end through on the bottom not, clipped it off and remelted the end. I did not check it on the draw board but I measured it on the T square and it is 1/2 inch LNG as it should be.
It feels better this way. I do not have to move my head forward to get my nose on the string.
Stabilizer change – 2013 Dominator
by Chris on Jun.10, 2013, under Bow Changes
I put one ounce back on all three bars to return w weight to how it was prior to installing the Bomar Axels.
I also angled the back bars down one notch to see if it would improve aiming.
Tiller adjustment – 2013 Dominator
by Chris on Jun.10, 2013, under Bow Changes
I took one half turn out of the top limb to try to calm down my aim a bit. I did not take a measurement.
Tiller Adjustment – 2013 Dominator
by Chris on May.12, 2013, under Bow Changes
Anchor change
by Chris on Jan.15, 2013, under Bow Tuning
I made a small change to my anchor last night, so that the knuckles on both my middle and index fingers straddle either side of the point of my jaw bone. I think this might help to eliminate or at least reduce tipping the release at different angles.
-
Welcome to the Think Tank
We've made some improvements around here, as you have probably noticed. Read the posts to see what we've been up to lately, and don't feel bashful about commenting if you like! And don't forget, Friends.ThinkTankGallery is updated regularly with new photos, so check there often.
Stay updated by subscribing to the RSS feed.
